PLC Control System Automatic Mixer / Blender For Fiberglass MGO Board Making Machine

The MgO board is environmental friendly, high fireproof and waterproof, can be painted, laminated, nailed and sawn. It is widely used for ceiling, wall panel, decorating of indoor wall and lining board for furniture. MgO board can replace three-ply board, five-ply board, flakeboard, MDF (Medium Density Fiberboard) and Gypsum Board.

• Oxygenic index%: >90
• Level combustion: SO
• Vertical combustion: SO
• Water content rate: 10.9%
• Capacity: 1.15g/cm3
• Static bending intensity: 169.46Mpa
• Density: T/ m3 1.13
• Water resistance: Without chalking for 24 hours and there is no change on surface
• No "Three-wastes" (waste water, waste gas and waste residue), no pollution and environmental protection

• Light weight, impact resistant
• Non-burning, moisture resistant
• Sound proofing, heat insulating
• Chemical resistant, insect-proof, erosion resistant
• 100% no Asbestos contained

• More space efficient, easily drilled for plumbing
• Can be cut and routed, can be decorated, painted or tiled
• Easily installed by nails or screws
• Can be flexed to fit curved surfaces
• Scientific prescription, real green and environmental-friendly material

The mixer machine is used to make the mgo board and other kinds of exterior wall thermal insulation board. The machine adopts the fully enclosed design, the mixing time is shorten half time than the exposure mixer, the mixer speed is faster and the mixing materials more uniform. Automatically feeding the material greatly reduce the labour intensity.